Hangman Z-Hanger Heavy Duty Mirror, Picture and Panel Hanger -Aluminum: Z-12-2

The 12-Inch Z-hanger is a simple, two bracket assembly that locks together. One bracket is secured on the wall while the other bracket is secured on the object to be hung. Holes are punched 4-Inch on center.

Check out our website for details…

3 comments

  1. Boulevard Estates says:

    These are very sturdy, and the screws work great on drywall I used two of these to hang a mantle above my fireplace. These are very sturdy, and the screws work great on drywall. I placed these so that some of the holes went over studs in the wall – and I used standard construction screws for those holes, then used the included screws for securing to the drywall.The result exceeds my expectation. Measure correctly and you will have a very snug fit against the wall for whatever you are hanging. I’m super excited that this went so…

  2. Jay Jay Kay says:

    Aluminum Heavy Duty Hangers Used only one half but it holds up a very heavy piece of artwork and I am very happy with the hangers. One package has four pieces, two for the top and two for the piece to hang if it’s that long. I did add some extra screws. These hangers can handle probably 50 to 75 pounds of weight if you use all the screw holes with additional screws and possibly extra long ones into 2 x 4 studs. I would consider adding bolts and nuts to hold the piece if it’s 75 pounds. Consideration should be utilized on…

Leave a Reply